Saturday, 28 July 2012

Do it yourslef : Double Loop Belt !

Hello!

A little double loop belt knot in a few of your outfits can really work wonders.  So, here's a little picture tutorial! Note that this only works on longer belts as you'll need quite a bit of belt to wrap around.

Enjoy the tutorial!

Step 1: Tie the belt around your waist and buckle it where it fits naturally.

IMG_7715ps.jpg




Step 2: Take the tail end of the belt and slip it underneath the other side of the belt about two inches past the buckle.


IMG_7717ps.jpg





Step 3: Take the tail end that is now pointing upwards and slip it through the belt loop just past the buckle.


IMG_7721ps.jpg



Step 4: Tighten the belt at this point so that it is taut. 

IMG_7722ps.jpg


Step 5: Take the tail end of the belt that is now on the other side of the buckle and slip it underneath the belt about an inch away from the buckle 
IMG_7726ps.jpg


Step 6: Take the tail end of the belt that is now pointing upwards and slip it through the hole created in the previous step.  
IMG_7731ps.jpg


Step 7: Tighten the belt and viola! The finished belt loop knot should look like this:
IMG_7713ps.jpg

No comments:

Post a Comment